Synergie F-L Full Adhesive, Plasterable, white PP Fleece Window Tape (60mm – 200mm widths)
Synergie F-L (finger-lift), Full Adhesive, Plasterable, white PP (Polyproplene) Fleece Window tape is a white, multi-layered (PET.PA) thermobonded tape with a high performance, moisture resistant, acrylic coating. We stock the product in five widths: 60mm, 75mm, 100mm, 150mm and 200mm. The tape is primarily suitable for internal application onlys. The tape has a Sd value Sd 40m, which protects against condensation. The tape backing has full adhesive and comes with unique split finger-lift liners. The tape is ideal for laying at the joints between frames and walls to guarantee airtightness (internal). The surface of the tape has been designed to be plastered over, where required.
Application of this tape: Identify the surfaces to be sealed, making sure all surfaces are dry and free from dust and grease. We recommend the use of Synergie Spray Primer on porous surfaces. After cutting the tape to the desired length, remove the 12mm protective liner from the acrylic adhesive tape, apply the adhesive surface to the border of the window/door frame and press firmly with the Pressing Roller along the entire surface of the adhesive tape so that the glue bonds properly. Then remove the other split liners and place the adhesive side on the surface of the wall and press firmly with the pressing roller along the entire surface of the adhesive tape so that the glue bonds properly. Be extra careful to ensure you get a full bond to the substrate along the length and across the width of the adhesive tape, and that the tape lies fully flat along the substrate. If the substrate is uneven, particularly rough blockwork, then we recommend that any gaps that exist between the tape and the substrate are filled with a bead of Synergie adhesive paste, gently pressed down, to fill these gaps. Once the tape is fully bonded to the substrate it can be plastered over.
