Adhesives and Primers
Synergie Anschlusskleber AK adhesive paste, in 310ml cartridges, is designed for gluing and sealing the overlaps of vapour control layers or breathable membranes and for gluing them to other surfaces, such as blockwork, plaster and wood. Can be used around small gaps along timber floor joists in a continuous bead. It is also suitable for fixing FI-D Window tapes for door and window frames on adjacent blockwork. The surfaces on which the Adhesive will be applied must be clean, dry, stable and free from dust or grease. Using a mastic gun, apply a continuous bead of between 6-8mm in diameter to the substrate. If the surface is particularly rough, increase the bead size as appropriate. Then gently press down on the vapour control layer or FI-D window tape, but do not press the adhesive completely flat. The drying time will depend on the porosity of the surface, the temperature and the amount of adhesive applied.
