Red Fleece Window Tapes
Synergie FI-D AC Window Tape is the most cost competitive fleece tape in the market. It is a universal tape for indoor use. With an Sd value of Sd 40 it helps control vapour diffusion. It adapts to all types of surfaces and can be plastered over. The tape has a single adhesive strip for attaching to the edge of the window/door frame, which will achieve a very strong bond after it has been rolled in using the Pressing Roller. The other side of the tape is plain for applying the Synergie Adhesive paste. We recommend that a 6-8mm bead of adhesive is applied to the substrate before gently laying the tape on top of the bead of adhesive. The corners are then sealed with grey fleece Repair tape 60mm, or a strong bead of Synergie Adhesive paste, to guarantee an airtight seal. The FI-D tape can be used for masonry and wooden surfaces, such as solid wood, laminate, OSB, plywood etc. The tape is stocked in two widths, 150mm and 200mm and comes in rolls 30 metres in length.
Synergie FI-D AC + BU Window Tape is similar to the above, but comes with a 23mm butyl strip (BU) and a 23mm acrylic strip (AC) on each outer edge. The AC strip is adhered to the window frame, allowing the window tape to traverse across the cavity, to be sealed to the inner leaf blockwork using the 23mm butyl strip. We strongly recommend use of the Pressing Roller and Spray Primer to achieve a full, airtight seal. The tape is stocked in three widths, 125mm, 200mm and 250mm and comes in rolls 20 metres in length
